Why does discharge of conduction oil furnace have floor level value and points for attention of smok
On the specific sort of boiler, this article will be involved, it is to be conduction oil furnace this one specific boiler is phyletic, and hope everybody can be treated seriously and undertake, because such ability will be only relevant knowledge is firm master, then, oneself let be benefited from which in can handling real work.
1.How does manufacturer of production of conduction oil furnace assure product quality?
Conduction oil furnace produces manufacturer, its want to assure the word of product quality, it is to need to accomplish the following this at 2 o'clock, its are specific it is to be: It is to want the stuff with good service mass to machine make, use proper technology and treatment device; 2 it is the product wants to have quality inspection before leave factory, the product of off quality cannot leave factory undertake selling, accomplish above this at 2 o'clock, can achieve a goal.
2.Conduction oil furnaceReplete the test-drive after new oil warms upNeed what to principle follow in the operation?
Will tell from professional point of view, conduction oil furnaceReplete the test-drive after new oil warms upIt is to should follow a few principles in the operation, and specific if tell, it is to be"One slow 2 stop "This one principle, among them one slow it is to point to warm up speed wants slow, 2 stopping is to point to in95 ℃,110 ℃ and 210 ℃,230 ℃These two temperature paragraph should stop to warm up, let its temperature keep period of time. To this at 2 o'clock, authority is due and clear understanding.
3.Why should its discharge have floor level value in conduction oil furnace?
In conduction oil furnace, its discharge should have floor level value, because,be if boiler discharge is less than this one particular numerical value, the temperature of conduction oil is to be able to exceed its forehead to decide numerical value, then, make conduction oil occurrence oil tastes these phenomenal problems such as ageing, use what affect conduction oil normally move normally with what reach conduction oil furnace. So, be based on this, ability can have this to set a requirement, and it is to want to be carried out strictly.
4.The smoke evacuation temperature of conduction oil furnace whether must is prep above oil lukewarm?
The smoke evacuation temperature of conduction oil furnace, will tell from professional point of view, its are must prep above oil is lukewarm, and such boiler ability are only normal heat exchange. In addition, what everybody still needs to know is, the smoke evacuation temperature of conduction oil furnace is decided by craft with oily temperature, and, will tell commonly, the temperature giving oil of conduction oil is to be in250 ℃ above, and temperature of boiler heat exchange is to be50 degrees go to 70 degrees.
Leave a comment