Enterprise News

Filling oil of conduction oil furnace reachs a few serious points for attention in use process

The conduction oil furnace in boiler this one specific sort, believing everybody is won't feel unfamiliar or unfamiliar, because the website is medium,undertaking introductory demonstrative all the time, will be familiar with ceaselessly and understand sort of this one common boiler, the face is not exceptional also under place, still have this one topic, just be on the look inside in front still do not have, will let everybody deepen the understanding degree of pair of conduction oil furnace.

1.On conduction oil furnaceKw, are its He Hanyi?

On conduction oil furnace, its lowercase Kw, if explain from professional point of view, its are the power unit that points to this boiler, its Chinese name is kilowatt. And, 1000KW=1MW. In addition, this boiler unit of this one power is to be able to undertake conversion, it is to be: 70010 thousand kilocalorie of Kw=0.7MW=60.

2.The filling oil notice of conduction oil furnace

Conduction oil furnace is on filling oil job, furnace of its gas phase and fluid photograph furnace are distinguishing, so, answer to be treated apart. If be gas phase furnace, it is to be in commonly10 degrees fill below oily, its design pressure is actuating pressure 1.2, 1.5 times. If be fluid photograph furnace, it is to be in 30 degrees to fill below oily, its design pressure is actuating pressure 1.05, 1.2 times, and, difference of pressure of imports and exports of conduction oil of fluid photograph furnace should is more than 0.15MPa.

In addition, what we still need to know is, if temperature of filling oil of conduction oil furnace is exorbitant, can bring about this boiler to drop velocity of flow is too rapid, the inhomogenous sex that aggravating conduction oil is heated, then, accelerate the hot degradation rate of conduction oil, bring about conduction oil furnace to appear the knot is anxious this one problem.

3.Conduction oil furnace is in use process, what serious points for attention is there?

Conduction oil furnace is using the serious points for attention in the process, its are to be:

The microtherm conduction oil in conduction oil furnace, if its water content is exorbitant, so, it is to be able to bring about oil to press force occurrence wave motion. After stopping pump, if conduction oil is in heating furnace stagnant word, conduction oil temperature is elevatory, if exceeded oily fluid can susceptive limit, so, can shorten the service life of conduction oil. In addition, conduction oil overheating, still can bring about occurrence knot of conduction oil furnace anxious, char and jam wait for a problem, occurrence danger or reason of hair make trouble. So, conduction oil furnace is in use process, should avoid afore-mentioned these problems.