Hot News

The complement of conduction oil of conduction oil furnace and what to need to control? - conduction

ToConduction oil furnace, we also should have stress study and knowledge, because, its also are the main product in the website, so, the attitude studies in its, be cannot mix cursorily lax, otherwise, can affect study result, and, reveal its importance without the body. So, stem from afore-mentioned reasons, below, proceed will come on the horse, hope everybody can have from which some of results and inspire.

The conduction oil furnace of 1.3500KW, the coal fired boiler of how many are its equivalent to? Design and make of furnace to conduction oil, whether to have particular demand?

The conduction oil furnace of 3500KW, its are equivalent to the coal fired boiler of 5t/h. And design and make of this kind of boiler to conduction oil furnace, its have demand of a few regulations for certain, and, this also is without doubt. Its construction process, be the relevant requirement that must want to accord with a country to set, and, should carry out strictly, cannot careless.

2. conduction oil furnace, the complement of its conduction oil, below what temperature to undertake aptly?

Conduction oil furnace, its are the cent of photograph having liquid and gas phase, ask to fall in specific temperature so, differ somewhat. If, it is run-of-mill conduction oil furnace, so, temperature is to be 30 degrees the following, and the conduction oil furnace to gas phase, it is to be in 10 degrees the following. Additional, on design pressure, this is both also be different, fluid photograph furnace is to be 1.05, the actuating pressure of 1.2 times, gas phase furnace is 1.2, the actuating pressure of 1.5 times.

The conduction oil in 3. conduction oil furnace, should what undertake be controllinged strictly to its? And, coal fired conduction oil furnace, what are its?

The conduction oil in conduction oil furnace, need has strict pilot side, it is the viscosity that is conduction oil, flash point, and its acidity is worth these 3, should make sure conduction oil is the flow condition that is stability in boiler. And the coal fired conduction oil in conduction oil furnace furnace, its are one kind uses the boiler that circular pump undertakes enforcing fluid photograph circulates, after carrying heat energy the equipment that use heat, can return its what heat afresh.