Hot News

Debug reach common problem processing technique

Debug a part

School assignment is accepted outside examining, assure to not have by accident hind, can mode.

1, examine fan circumgyrate

Find fan contactor Push gently with screwdriver, treat fan circumgyrate, anticlockwise for circumgyrate. If discovery is circumgyrate, convert random two ahead can.

2, examine oil path successful

Find oil pump contactor, push gently with screwdriver, see a machine give oil successful. ** pump contactor while, we can recuperate pressure of a paragraph of fire first, control in a kilogram commonly, have special requirement proper motion mediatory.

3, recuperation is baric

Pulverization needs to be in commonly with atmospheric pressure 2 half —3 between, carry barometer upgrade, suitable hour hand is increase atmospheric pressure. Anticlockwise to reduce atmospheric pressure, after recuperation is finished, press barometer chain can.

4, recuperation air door spreads out large and small

There is < to install in screen top left corner > pushbutton, click enter

The first option spreads out time to recuperate for air door of a paragraph of fire It is commonly (8)

The 2nd option spreads out time to recuperate for air door of 2 paragraphs of fire It is commonly (10)

Boiler combustion machine

Afore-mentioned these are recuperated finish henceforth, can ignite.

Click < to start > , before before 60 seconds are, blow sweep time, open fuel injection of end points fire next.

A paragraph of fire, after it is normal that a paragraph of fire burns, can go up boiler. On bucket of advertent wind fire is foremost when boiler end is made the same score at boiler wall can.

Common problem processing technique

1, the dot is not worn

A lot of clients are advantage, igneous link tries outside leave out, go up directly boiler, below this circumstance, can present an aspect a few times the dot is not worn, because oil path has air,that is, can abandon from oil pump a place first drop a hint, next again much it is good to answer.

2, have smoke

If light fire has smoke, can reduce oil pressure, increase atmospheric pressure, increase wind force to recuperate.

3, the butt joint is automatic

Automatic system must intervene passive does a drop, it is control line is received burn machine cannot electrified. (12V, 24V all cannot, be necessary is bit drier) , if control line is electrified, need to add relay to change electrified signal into passive to do a drop