burnergas burner price in bd
Decades of dedicated business have made us a leader in the thermal industry. Our standard burners, non-standard custom burners and high-precision combustion equipment can meet the needs of a variety of heating equipment such as boilers, thermal oil furnaces, asphalt mixing buildings, covering heating, power, road engineering, petrochemical, food , Pharmaceutical, and many other industries, Xugong Group, Sany Group, PetroChina, Beijing Benz, Luhua Group, Samsung Electronics, Shanghai Disney, etc. are all our partners.
When the power is switched on, the combustion machine is started, and an electric spark is generated between the ignition electrodes. After about 13 seconds of pre-blowing, the solenoid valve of the oil pump is automatically opened.At this point, the flame detector senses the flame brightness and the controller is locked.The ignition electrode will delay ignition for about 15 seconds to stop ignition, and the burner will enter the normal working state.If the ignition is not successful, no flame is formed, or the flame detector does not feel the brightness of the flame, then after about 10 seconds of safety time, the safety alarm system will operate, the starting working procedure of the burner will be cut off, and the fault red light will be on.When the combustion machine is just started, if the flame detector has sensed the brightness, the safety system will operate, the controller will not enter the normal program, the solenoid valve will not open, the nozzle will not spray oil, after about 10 minutes of safety time, the fault red light will be on.Therefore, when starting the burner in the light must first cover the flame detector, do not let it see the light, until the burner after the flame, immediately release the flame detector, otherwise the burner can not work properly.The burner is red for 3 minutes before restarting.
Burner for ep-w waste incinerator
Applicable fuel: natural gas / light / heavy / residual oil / mixed fuel
Power range: 500-20000kw
Suitable waste incinerator: 200-900 tons / day
Technical features: stainless steel body with outstanding high temperature and corrosion resistance
Safe
Common language symbol, high accuracy intelligent control device, digital intelligent program controller, information feedback and remote transmitting, human-computer interface conversation, quick information reading and understanding barrier-free processing, anticorrosive and heat resistant burning front end, combined air valve, high and low pressure monitoring of EBICO form dual-core safe control.
Maintenance matters:
1. The light diesel oil used must be clean. Please pay attention to cleaning the oil tank and oil filter regularly.
2. Under normal use, replace the oil nozzle once a year, replace the elastic coupling and the rubber parts on the coupling once a year and a half.
3. Foreign bodies are forbidden to enter the air duct.
4. The burning machine should be kept away from inflammable and explosive products and equipped with fire-fighting equipment.
5. Adjust the oil pressure according to the indicated value of oil pressure.
6. Check the combustion cylinder, impeller, flame detector and ignition electrode regularly to remove oil and carbon.Flame detectors, in particular, should be kept clean and free of water.
7. Be sure to cut off the power supply when maintaining the burner.
For more cutting-edge information on burners, please pay attention to the "EBICO Burner" official account.
Leave a comment